Mount a sprocket on your engine 1″ crankshaft or jackshaft
Hub has a 1.25″ OD shoulder for a strong sprocket mount. The Hub has a 1″ bore for the Axle mount with a Set screw hole opposed to keyway.
- Steel, Plated
- 1″ Bore
- 1/2″ Thick
- 2.25″ OD
- 1/4″ Keyway
- 3-Hole
- Bolt Circle 1.75″
- Bolt Pattern P5340
add a Sprocket for this hub
- Aluminum
- #35 Pitch
- Bore 1.25″
- 3 Bolts @ .250″
- Bolt Circle 1.75″
- Tooth Range 23-50
- Bolt Pattern P5340
